Hi blokes as per topic title. I would like if possible to catch up with someone that has this conversion and bang 1 of my rims on your car to see if I will have any clerance issues. I have 14 inch superlites. Cheers Brad

_________________
1928 Model A CC Pickup

i do, with the 253mm rotor'd 240k strut. no disc's on it at the moment but i've had 14's on it before, just steelies. welcome to try it, im in geelong though

_________________
Dave W

The 1600

Recommended traders: Nissanman, pro240c, 2door510, Datsport, mkyle, Green510, Um_510, jdmdatsun510, Ludachris

Thanks mate. It's a bit to far though. I'm in Frankston. Cheers

_________________
1928 Model A CC Pickup

hey Brad,
Damo has hilux brakes on his, I know that TRX fit, I don't think that 14's will fit, his car is not in melbourne now but he's bringing it down over the weekend.. give him a call...

_________________
____________________________________________________________________________________________
http://ozdat.com/forum/viewtopic.php?f=33&t=14169
D4TSUN
Engine Management Sytem: Screwdriver!

My mate has the 4 spot hilux calipers on his 16. He runs 14" 200bsx rims on his. Only problem is he lives in montrose and doesn't have a license atm. If you were willing to drive up that way im sure he'd be down. Riley.

_________________

I'd like to know if they'd fit too. I can't find an answer for absolute certain on here!

_________________
green200b - aka Alistair

The fleet:

Australia:
'80 200B GX - the green200b - hibernating
'81 RX-7 - 12A extend port - daily
'74 RX-2 - 13B bridgeport - cruiser

Europe:
'93 200SX - CA18DET - tourer

They DO fit, as i've said in a number of posts on here, and riley just confirmed too.
it just depends which struts your using and then work out which discs your going to use, either early 4 stud magna which are the same as the 276mm magna, just smaller diameter (256mm i think, and not available as blanks, 4x114.3 pattern drilled) or use early-mid 90's galant VR4 which are same again, but 266mm i think, so need 2mm or so machined off the disc diameter.

but its the caliper that determines the wheel size, and it clears fine on the 14's i've tried on it using 240k struts that run the 253mm disc.

_________________
Dave W

The 1600

Recommended traders: Nissanman, pro240c, 2door510, Datsport, mkyle, Green510, Um_510, jdmdatsun510, Ludachris

Hmmz okay. What 14 inch rims do you / did you try? Cheers.

_________________
1928 Model A CC Pickup

tried my old 14x7 0 offset globe bathursts
and 14x6 steelies off a s12 and a number of others that were lying around
just when i needed to move it. cant make any promises as i've never seen
inside your wheel though, the same as other brake combo's, some wheels
just dont fit because of the wheel design.

_________________
Dave W

The 1600

Recommended traders: Nissanman, pro240c, 2door510, Datsport, mkyle, Green510, Um_510, jdmdatsun510, Ludachris

Cool thanks mate

_________________
1928 Model A CC Pickup

No worries man, good luck with it!

_________________
Dave W

The 1600

Recommended traders: Nissanman, pro240c, 2door510, Datsport, mkyle, Green510, Um_510, jdmdatsun510, Ludachris