Hey. I got a GTR intake I wanna fit to my 240z. Doing this is not well documented at all. It's a warm l28; I'll be looking at a little bit over 200hp (probably), and I need to know what injectors will fit with it.

I really have no idea about skylines later than r30.

Would something like stock rb25 non-turbo injectors do the trick? Would they fit on a GTR intake? I don't have a fuel rail, I'd need that, too.

Sorry for the vague-ness.

There's an auction close to me where a whole bunch of fuel rails + injectors will be sold very cheap. If I knew exactly what I was looking for, I could stand to save a lot of cash.

yep RB25 turbo injectors would be enough. But if you plan to up your boot and head for more BHP then maybe aftermarket items say 400cc - 550cc would be the way to go. With any turbo engine you will end up always wanting more power So buy your injectors ounce and be done with it.

_________________
1928 Model A CC Pickup

NO, RB25 Turbo injectors wont fit, only CA, RB25 N/A and RB26 injectors will fit the RB26 rail, and maybe RX7 with different o-rings, unsure about RB20, RB25 turbo injectors wont fit as they are side feed like the SR20,

Depending on what power you wont, as 6 GTR injectors (440cc) can just support around 300rwkw's, CA injectors times 6 can probably do 250rwkw's

But for 200hp, i'd recommend either RB25 n/a injectors or CA turbo ones, both will give you some headroom to play with if you choose to and also be very easy on the wallet, i'd say less than $50 for 6 of them, as the aren't sold easily as everyone wants bigger injectors than that, such as 6 RB26 injectors sell for around $300

Sweet. Do you guys have any leads as to where I can get some (and a fuel rail)?

That would've been my first guess

Try any import wreckers, SkylinesAustralia.com, NS.com