hey guys, i was just wondering if id be able to use an aftermarket alloy sump with my sr20 in my 1600, im using a datsport fitting kit, will there be any drama's being a larger sump?? any help would be good lads...

_________________
and dont come back to the bay rex

Check out Ebay for cheap Alloy sumps.
Jeff Shoesmith is running one on his SR in his Coupe...

_________________
Classic Auto Fabrications:
http://www.ozdat.com/forum/viewtopic.php?f=38&t=31659

http://www.lescollinsracing.com/

thats epic so they fit, thanks man ill give it a look...

_________________
and dont come back to the bay rex

Hey mate, i purchased a genuine trust item off yahoo auctions japan for around $250.

You can find some real bargains if you can be bothered to look, or just buy a cheapy as their is no real difference from what i can see.

Cheers,
Luke

The cheap copy ones aren't finished too well, you'll want to spend a bit of time with some fine sand paper going over the inside of the casting as it's pretty rough.
I've heard no bad stories after this is done.

_________________
Bluebird TRX
- SR20DET (died) 13.1@107mph
- Turbo'd SR20DE (sold) 12.9@108mph

S15 Daily

thanks lads, i found a few on ebay and got my self one for $160, ill spend a bit of time finnishing it off like u said Ders and she'll come up good hopefully should be coming today..

_________________
and dont come back to the bay rex