I need to know if any of the datsun Z bolt on fender flares would fit or could be made to fit on my datsun 1000 (b10)

If you wanted to measure the width and height of your guards I can meausre my Z ones and that should give you some indication.

Dave

_________________
USA Daily: 2014 Nissan GT-R, very minor modifications for the track
USA Project: 1978 280Z, minor suspension upgrades, VK56DE conversion in progress. SOLD
AUS Race Car: 1973 240Z, L28ET, Autronic, GT35R. SOLD
AUS Project: 1972 1600, 3200km old S15 SR20DET, ground up rebuild. SOLD

ok I'll measure my fender guards and post it in about 2 days

We held a set up to a friends coupe a while back, and whilst they could be sort of made to fit to shape of the car quite well, they really dwarfed the tiny 12inch rims and looked shocking and way too big.

_________________
I can only please on person per day
Today is not your day and tomorrow's not looking good either.

73 240ZG replica under construcion (grandprix white, fender mirrors and watanabes )

so fit 16s already...!

_________________
frankenstein projects R us.

The Republic of Western Australia -
Propping up the Nation's Economy since 1901.

Why only 16's go the whole hog and go a set of 18's . Would look hilarious, and probably handle hilariously too. If you want to fit Z flares onto a non Z, the ZG style fit ecxellently on the old school 808's and RX7's.

_________________
I can only please on person per day
Today is not your day and tomorrow's not looking good either.

73 240ZG replica under construcion (grandprix white, fender mirrors and watanabes )

The flares wouldn't make my wheels look small or look dumb because I have 13 inch 235 wide diamond racing wheels and they stick out 2 inches from the car so I wanted to get some flares for it. I also have bfgoodrich radial ta tires.

Diamond Racing Wheels

Helix112 I measured my wheel wells they are about 26" wide and 16" high. Check out the pic