| OZDAT https://ozdat.com.au/forum/ |
|
| L20B reground cam identification? https://ozdat.com.au/forum/viewtopic.php?t=32837 |
Page 1 of 1 |
| Author: | RAT510 [ Sun Jun 29, 2014 5:32 pm ] |
| Post subject: | L20B reground cam identification? |
found a cam in a box of stuff and it looks like its been ground from an original B cam. there is a number stamped on the sprocket end that reads 4D234. anyone got any ideas what this grind might be or who I could ask? |
|
| Author: | dat2kman [ Sun Jun 29, 2014 9:12 pm ] |
| Post subject: | Re: L20B reground cam identification? |
Clve Cams bought all of Wade cams stuff. Clive may be able to tell you what you have. Alternatively, stick it in a head on a block, dial it up relative to TDC and opening/closing of intakes/exhausts using a degree wheel. |
|
| Author: | RAT510 [ Mon Jun 30, 2014 10:52 am ] |
| Post subject: | Re: L20B reground cam identification? |
No luck with Clive. Might need to make up a degree wheel and have a measure. In saying that can anyone recommend a good cheap brand of degree wheel that suits an l series. |
|
| Author: | Dave [ Mon Jun 30, 2014 3:06 pm ] |
| Post subject: | Re: L20B reground cam identification? |
Make one youself - bit of cardboard, scissors, texta and a protractor. Or download, print and stick one to a bit of cardboard. There are a few sites to download one from, have a search - I did this and it worked fine. EDIT: Here you go, here's one http://www.tavia.com/free_degree_wheel.html |
|
| Author: | Ant-Dat [ Tue Sep 23, 2014 4:50 pm ] |
| Post subject: | Re: L20B reground cam identification? |
My cam has marking at the sprocket end and I bought it from Baz @ Datsport |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|