OZDAT
https://ozdat.com.au/forum/

Easy off bam oven cleaner on car parts.
https://ozdat.com.au/forum/viewtopic.php?t=30932		 Page 1 of 2
Author:  skitzone [ Tue Apr 02, 2013 9:03 pm ]
Post subject:  Easy off bam oven cleaner on car parts.
Do it, life changing. 3-4 mins spraying. 2 hour wait scourer off within 2-3 minutes. I used the easy off bam brand.



[ img ]
Author:  d [ Tue Apr 02, 2013 9:53 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
Great stuff, how much for that stuff whats the ingredient?
Tried a few with lactic acid even but best result has been
using the 5 minute oven cleaner stuff for $3 but sprays on
like a knob with a faulty and sticky foreskin.
Author:  skitzone [ Tue Apr 02, 2013 9:59 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
Dno it's the woman buys I just heard oven cleaner before n I was looking at those wheels and sighing... Hard.
I can't honestly believe how well it worked saved me so much time!
Author:  d [ Tue Apr 02, 2013 10:08 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
Great wheels what are they?
Author:  Dave [ Tue Apr 02, 2013 10:20 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
Hmmm, I've been putting off cleaning a set of filthy old TRX rims to put on the trailer, will give this a go on the weekend :thumbsup:
Author:  Dave [ Tue Apr 02, 2013 10:21 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
On second thought, no I won't. You've melted the centre right out of the wheel :lol:
Author:  skitzone [ Tue Apr 02, 2013 11:48 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
Trust you dave ;)

D they are auto Strada by Pirelli I've reversed the rears so they're now 15x7 -28 I'll be running +28 fronts with 20mm spacers. 50mm rear flares 25mm fronts.
Author:  skitzone [ Tue Apr 02, 2013 11:56 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
[ img ]

Excuse 4wd spec. Front coil overs are already not captive n I hate helpers, need new shorter inserts and haven't put the r200/disc rear subframe in yet.
Author:  old-tin [ Wed Apr 03, 2013 10:41 am ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
You have to be carful with oven cleaner on alloy parts as it contains costic witch is corrosive to alloy. I personally would not use it on things like carbs or heads.
Author:  d [ Wed Apr 03, 2013 10:52 am ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
Oven cleaner is nasty and glad the Bam thank you Maam does the job if patient.

Nice wheels and will look awesome, whats planned for the heart?
Author:  skitzone [ Wed Apr 03, 2013 10:58 am ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
l18w
9:1 compression head, 4wd pistons with a w53 with reshaped combustion chambers
280zx valves
292 degree 10.5 mm lift camshaft
40mm? ports from memory
28/71 turbo on a direct fit 80's draw through assembly
45 dcoe weber in front of turbo
2.5" dump pipe with 9 psi external waste gate.

Front suspension is volvo 4 pots, threaded struts with 240k inserts (still to long), rose jointed adjustable control arms and k-mac sway bar.

Rear is tokico shocks, 1100 lbs springs, r200 3.91 diff, commodore rear disc brakes, slotted for camber adjust with a 3" hole for exhaust.
Author:  d [ Thu Apr 04, 2013 11:22 am ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
whereabouts are you?
Theres a Z22 engine and L20b engine at the local wreckers for 2145cc combo with
good rod stroke ratio, bit taller but factory 87mm bores can go 89 without issues.
I just thought since its turbo will need engineering anyway so why not go with the
most capacity you can get with good reliably for boost?

BTW the Easy Bam I went to buy tonight but there were 3 one pump spray the other
atomised spray all said the same thing nothing about oven but found the ingredient
in the can atomised stuff is sodum hydroxide 3% which means if thats the case
household bleach comes in 4% strength and with lemon scent for 1.14 at coles.

The pump spray stuff was formic acid 2.5% which I think termites use to sh*t on ants
but not going to put my parts into a termite mound :D
Author:  Dave [ Wed May 08, 2013 1:49 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
Dave wrote:
Hmmm, I've been putting off cleaning a set of filthy old TRX rims to put on the trailer, will give this a go on the weekend :thumbsup:
Finally got around to it - awesome :shock:

Quick spray with the oven cleaner, wait for half an hour, hit them with the Karcher and they look awesome :thumbsup:
Author:  d [ Tue May 14, 2013 1:54 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
which one did you get Dave there are 3 on my supa with different ingredients?
the one with sodum hydroxide 3% or formic acid 2.5%
Author:  Jandamarra [ Tue May 14, 2013 2:05 pm ]
Post subject:  Re: Easy off bam oven cleaner on car parts.
d wrote:
whereabouts are you?
Theres a Z22 engine and L20b engine at the local wreckers for 2145cc combo with
good rod stroke ratio, bit taller but factory 87mm bores can go 89 without issues.
I just thought since its turbo will need engineering anyway so why not go with the
most capacity you can get with good reliably for boost?

BTW the Easy Bam I went to buy tonight but there were 3 one pump spray the other
atomised spray all said the same thing nothing about oven but found the ingredient
in the can atomised stuff is sodum hydroxide 3% which means if thats the case
household bleach comes in 4% strength and with lemon scent for 1.14 at coles.

The pump spray stuff was formic acid 2.5% which I think termites use to sh*t on ants
but not going to put my parts into a termite mound :D
Where is this z22??? :hug:
Page 1 of 2 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/