^ is the correct answer.
example...
![[ img ]](http://i566.photobucket.com/albums/ss105/DATO4/TK20.jpg)
| OZDAT https://ozdat.com.au/forum/ |
|
| Guide coat painting question https://ozdat.com.au/forum/viewtopic.php?t=28532 |
Page 1 of 1 |
| Author: | mattywood [ Sat Apr 14, 2012 10:57 pm ] |
| Post subject: | Guide coat painting question |
Hi folk I am restoring a fibreglass hardtop for a fairlady. I have bogged up the cracks in the gel coat but now need to sand the bog before I send to a spray painter. I am spraying the roof in two pack. I have heard two pack can react with the wrong primer or guide coat paint. Do I use enamel or acrylic paint for the guide coat before I spray in two pack. Hope someone can help. |
|
| Author: | MYDATO [ Sat Apr 14, 2012 11:38 pm ] |
| Post subject: | Re: Guide coat painting question |
You'll be fine with a single pack guide coat as you are only using a mist of it. Most of it will be rubbed off when sanding anyway. |
|
| Author: | DATO4 [ Sun Apr 15, 2012 6:25 am ] |
| Post subject: | Re: Guide coat painting question |
^ is the correct answer. example...
|
|
| Author: | mattywood [ Sun Apr 15, 2012 7:24 am ] | |
| Post subject: | Re: Guide coat painting question | |
You'll be fine with a single pack guide coat as you are only using a mist of it. Most of it will be rubbed off when sanding anyway.
Cool so my enamel hardware store matt black will be fine? |
||
| Author: | sssr20 [ Mon May 07, 2012 11:09 am ] |
| Post subject: | Re: Guide coat painting question |
you might find that enamel will clog your sandpaper real quick. i always use acrylic for a guide coat unless i use a 2 pack hifill primer that is tintable. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|