| OZDAT https://ozdat.com.au/forum/ |
|
| brake calliper torque settings https://ozdat.com.au/forum/viewtopic.php?t=27882 |
Page 1 of 1 |
| Author: | Alex307 [ Sat Jan 28, 2012 1:35 pm ] |
| Post subject: | brake calliper torque settings |
what should i torque my brake callipers up to as in there twin piston callipers and i have spilt them and rebuilt them now putting them back together |
|
| Author: | NC1600 [ Sat Jan 28, 2012 8:30 pm ] |
| Post subject: | Re: brake calliper torque settings |
somewhere around 30-40nm should do it if your using 8 or 10mm bolts. I dont think there is exact spec for it as really all you to do is compress the o rings and hold the halves together. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|