OZDAT
https://ozdat.com.au/forum/

Which Master Cylinder?
https://ozdat.com.au/forum/viewtopic.php?t=25789		 Page 1 of 1
Author:  travm182 [ Fri Jun 10, 2011 10:48 pm ]
Post subject:  Which Master Cylinder?
Hey, i did a bit of a search but couldnt find a clear answer
Im under the impression that the way to go in the sence of a master cylinder for a small can booster in a 1600 with 240k front, R31 rear brakes is a 7/8 tandem.
These are Protex products

C110 6 Cyl 2.4 L
W/O Fluid Level JB1133 Tokico
C110
6 Cyl, 2.4 L JB1195 Nabco

Wondering what the difference between the one with the "fluid level" and what exactly it is? has anybody got pics?

Cheers :thumbsup: Also i understand you have to remove the Residual Pressure Valve due to disc/disc.
Author:  johnny roadkill [ Sat Jun 11, 2011 1:15 am ]
Post subject:  Re: Which Master Cylinder?
Is the "Fluid Level" version for a car with a brake warning light, maybe ? Might just be a fitting on it for the sender...
Author:  travm182 [ Sat Jun 11, 2011 11:15 am ]
Post subject:  Re: Which Master Cylinder?
Well that makes alot of sence, dunno why I didn't think of it like that! Cheers mate
Author:  Rod F [ Sat Jun 11, 2011 5:40 pm ]
Post subject:  Re: Which Master Cylinder?
It's probably just a float level attached to the reservoir cap on the front circuit.
I just cut the wires off mine.
Page 1 of 1 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/