| OZDAT https://ozdat.com.au/forum/ |
|
| 200B master cylinders (with angled bolts) - still buy? https://ozdat.com.au/forum/viewtopic.php?t=15821 |
Page 1 of 1 |
| Author: | mkyle [ Thu Jan 22, 2009 10:59 pm ] |
| Post subject: | 200B master cylinders (with angled bolts) - still buy? |
Hi. The master cylinder (from what I believe is off a 200B) has 2 bolts (angled - not straight up and down) connecting it to the booster. I know datsport/Stewart Wilkins/maddat sell 7/8 master cylinders, but can you still buy the old style master cylinders which will fit onto these boosters, with the angled bolts???? Will save a bit of mucking around and money if I can just buy a new one. Any help appreciated. Mark |
|
| Author: | nick [ Thu Jan 29, 2009 5:37 pm ] |
| Post subject: | Re: 200B master cylinders (with angled bolts) - still buy? |
most likely. Try your local Sprint Auto or Autobarn... |
|
| Author: | L18PWR [ Sun Mar 08, 2009 8:23 pm ] |
| Post subject: | Re: 200B master cylinders (with angled bolts) - still buy? |
200bs run the aussie style masters dont they? so would be the same as commodore ones. making 15/16ths and 1 inch ones easy to get |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|