Hi.
Yes I have purchased the following:
Fitting kit (im using a l20 currently) as well as the R31 Struts and Brakes.
The adjustable rear crossmemebr and R31 Brakes.
The Steering Box brace and Brake Booster and centre handbrake.
Let me say Im very pleased overall. I have just this week finished fitting the above and car is finally of the stands and at mechanics for QLD Trans compliance and some work on the L20.
I have only one problem at the moment, the ride height. With (15 x 6 38mm offset rims) at the rear using the recommended 240k springs is way too high 3" above tyre. I ordered a set of KINGS springs @ standard 240k height and the thing looks like a drag car
The front sits just above the wheels
and those 205/50 only just and I mean JUST fit under the front guards, also the inner clearance between the Front Strut and tyre is tight id say less than 10mm. So I'd recommend 195/50 ect over 205s in my experience with 38mm offset rims. I bought new 205s without testing so im stuck with them now.
Fitting of both the front and rear kits was Easy enough, make sure you fit the rear gearbox mounts before you attempt the engine mounts, I spent hours trying to make the 200b mounts (not supplied) fit onto the Datsport crossmember but the problem was the whole engine box assembley sits further back than the reversed home job mounts that were on the car when I bought it. So fit the rear datsport gearbox mount first and save yourself the heartache.
Actually the handbrake assembly using a 200b Centremount handbrake from Datsport had me a bit stumped I could not see how the cable from the handrake pulley connected to the swing mount fixed to underbody of car. So Ive left that in the hands of my mechanic.
So other than the ride height, (ill let u know what height KING 240k springs give best ride height this week) Im very happy. I used his recommended (KYB) shocks as well. Also the steering brace.
I have not tested the car as yet but put my money down on the fact that Baz has been doing this for a while. I found him very helpfull. Oh and VERY BUSY! lol
If you have more questions let me know.
malvan@optushome.com.au
Cheers,
Mal