Hey,

I was wondering if it's possible to fit SR20DET S13 Silvia brakes to my front & rear disc Datsun 1600?

I haven't ever heard of anyone doing it, but I can't see why not.

The stud patterns are identical. 4x114.3

Can I just put on S13 rotors and calipers or do I need a brake booster/master cylinder too?

_________________
Go The Datto!

you have 200b twin spots on the front of yours from memory so that means you have the hub style front disk. S13s are 'knock off' from memory so you will need hubs made up to take the disk. and the caliper would need lots of work too. offset, new mountings etc etc.

I have some Hilux 4spots if you wanna buy em off me, they will bolt up to your struts and with a U13 bluebird vented rotor should work well. They are a better caliper then the S13.

May have to go bigger resivoir with thst setup

I donno why your questioning your brakes on that thing, even if you go SR/CA/FJ etc etc they should stop you fine!

_________________
Chris.
Lost the Datto bug... But ill still hang around here and annoy you all!