Loving this build. Said it before, but one thing I will give you nz guys is that you aren't afraid of actually modifying stuff by yourself without crying every time something doesn't fit and hoping someone has a solution off the shelf.
With the bundy tube, any brake shop can usually supply it in lengths. I bought a 5/16's roll for my old mans car in 6 metres I think it was for $32.
Motorsport connections will have anything you need, but also charge normal retail for it.
thanks mate, ill have to go to town next week and look for some bundy tube. In mackay every bloody shop is closed at the moment, and when they are open its likely they wont have anything
nearly finished the tunnel but have run out of gas.
just needs a bit of hammer work to tidy it up and weld the rear part on.
filled the holes in the oil pickup as I want to only suck oil from the very bottom of the sump due to the small capacity
no other photos at this stage.
When I look at this "Ironman" comes to mind
It's a big tunnel, yes? What seats will it take in there?
Lovely work, as usual, maaaaate!
cheers mate,
bench seat, you can just see it on the left. its bolted in and slid right back. the front lip of the seat has a recess to clear that rib on the floor so it will slide forward at least 10 inches.
still enough leg room behind the bench for me to sit in the back seat and im a big guy so its all good!