hey guys.

looking for a new 7/8th Brake master for my 240k (C110 skyline) as the current one is well shafted (the rear brake pot had wheel bearing grease in the pot and thru the lines)

seen its a disk/drum ive been looking at the PBR JB1133 for the S30 240z (22.22mm) and got quoted 147 from supercheap.

but i also found this one on eBay which with shipping ends up costing 95au from mexico
http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT


7/8 BM from dat sport 135 + del?
http://www.datsport.com/hydraulic-brake-master-78.html


looks similar, thoughts?

if it was me i would and did get the datsport one. brakes are much importenteay

Should be about $105 from bursons for a PBR item.

_________________
1928 Model A CC Pickup

That's a reasonable price, otherwise shop around a bit more you could even find better. I wouldn't buy from mexico to save $20 - 40.

Might be better off asking for a 180b item which should be identical, more common.

ive tryed burnsons (asked for a 240k brake master) and he couldnt find one for some reasion, that was a year ago tho.

ill ask for 180b or just quote them the part number.

JB1133 is the one im looking for right?

thanks.

180B stock master is 3/4. You will have to go to bursons and look in their book. I can't remember part number. There will not be a listing for 240K or 240Z they are listed as something else only I can't remember it was years ago. Heaps of beer since then

_________________
1928 Model A CC Pickup

I ended up getting one from Datsport and it works very well.

_________________
green200b - aka Alistair

The fleet:

Australia:
'80 200B GX - the green200b - hibernating
'81 RX-7 - 12A extend port - daily
'74 RX-2 - 13B bridgeport - cruiser

Europe:
'93 200SX - CA18DET - tourer

Yep just dived into the receipt folder. Part number is JB1133 for a 7/8 240K 240z master cylinder.

_________________
1928 Model A CC Pickup

epic thanks.

yeah, i looked thru the PBR website and funny enough they had two listed for the 240k, both 3/4 and 7/8th BM's

will call around tomorrow and see what prices i can dig up and ill post my results.

jb1133
burnsons - 155.
all brake and clutch rocklea - 128. - ordered this one

A little late but these are also featured on the 720 utes. I removed one a while ago and paid $25 for it (second hand, good condition).

lol... every 720 i came across already had them pillaged, seen about 10.

i guess in the long run a brand spanker is a good thing...

128.15 JB1133