OZDAT
http://ozdat.com.au/forum/

Team Dat's 120Y Koop *update 15/10/13*
http://ozdat.com.au/forum/viewtopic.php?t=6564		 Page 10 of 14
Author:  Baz [ Tue Sep 25, 2007 10:57 am ]
Post subject: 
looks great Aaron.
If i had known you were going to weld it in i would have sent you a non powder coated unit. :wink:
what did you do about the insulation?
Author:  Team_dat [ Tue Sep 25, 2007 11:26 am ]
Post subject: 
it lived, a little water didn't hurt in cooling it down :twisted: but nothing serious, the car didn't brun to the ground.....

thanks again mate it worked out really well, and i can't take credit for all of it the father in law lent a hand as well.

now to get some 120Y steering arms.
Author:  Team_dat [ Tue Sep 25, 2007 4:58 pm ]
Post subject: 
where do you guys get the sikaflex from to seal around body sections?
Author:  datto-510 [ Tue Sep 25, 2007 7:29 pm ]
Post subject: 
Team_dat wrote:
where do you guys get the sikaflex from to seal around body sections?
you can buy auto underbody sealer, its kind of like black gunky silicon.
you can get it at supercheap.

is that what your after ?
Author:  Lurch [ Tue Sep 25, 2007 7:55 pm ]
Post subject: 
Team_dat wrote:
where do you guys get the sikaflex from to seal around body sections?
Bunnings! (?)
Author:  Team_dat [ Wed Sep 26, 2007 12:41 am ]
Post subject: 
Yeh Lurch thanks...

i thoguht there may be a certain type to be used. i'll be heading down there tomorrow then!
Author:  datto-510 [ Wed Sep 26, 2007 6:50 am ]
Post subject: 
Team_dat wrote:
Yeh Lurch thanks...

i thoguht there may be a certain type to be used. i'll be heading down there tomorrow then!
Bostitch Matric FC

I believe it seals and joins.
Author:  Team_dat [ Wed Sep 26, 2007 12:26 pm ]
Post subject: 
thanks guys!
Author:  Supercharged1600 [ Wed Sep 26, 2007 9:08 pm ]
Post subject: 
Team_dat wrote:
thanks for all the support BASTARDS!!!!! so here is some progress!!!

WOOOOOOOOOOO! :woohoo: :woohoo: :woohoo: :woohoo: :woohoo: :woohoo: :woohoo:

the tunnel mod is in! man it's good! but of gentle massaging and it's in! good work Baz
Safety First hey!?! :wink: :roll: :wink:
Author:  Beattie [ Wed Sep 26, 2007 10:31 pm ]
Post subject: 
Gee if you go ahead and do the EFI it will be even LONGER before its back on the road! And youve said you'll have this or that done "next weekend" a million times and it always ends up beeing months down the road :roll:

Hurry up :lol:
Author:  Team_dat [ Thu Sep 27, 2007 1:35 am ]
Post subject: 
Look i have a heap of other commitments, mainly the house which i have to put first. but it will get there.



and as for the safety, i offered all the gear i could, face sheild, goggles and gloves but the fatherin law didn't want them, he did use a welding mask and gloves during that part.....
Author:  Team_dat [ Wed Oct 10, 2007 1:45 am ]
Post subject: 
got my EFI pumps tonight, pierberg lift and bosch HP pump.

parts are just about collected for the EFI now. get it on the road, and then i can look at putting that gear on!
Author:  Team_dat [ Sun Oct 14, 2007 12:24 am ]
Post subject: 
today i got the front suspension in the ute steering arms worked a treat ;)

i also got the gearbox Xmember spacer in and the thing bolted up finally.

sealed the tunnel mod, and am getting a set of braided front lines on tuesday, for the brakes.
Author:  Waz [ Sun Oct 14, 2007 12:26 am ]
Post subject: 
Quote:
and am getting a set of braided front lines on tuesday, for the brakes
Captain obvious
Author:  Team_dat [ Sun Oct 14, 2007 12:32 am ]
Post subject: 
better than being seizure man.....
Page 10 of 14 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/