Hi All,
I’m thinking of changing the original 4 speed in my 1600 to a 240z 5 speed. The box I have has a flange end rather than a slip yoke for the drive shaft. I can’t seem to find any information on the adapter needed for the drive shaft to connect to it.
Can the flange be removed and changed to a slip yoke or a good drive shaft builder be able to make an adapter?
| Attachments: |
|
7005B84D-6916-4CF0-AFB4-C185F6A36A81.jpeg [ 1.71 MiB | Viewed 5771 times ] |