| OZDAT http://ozdat.com.au/forum/ |
|
| S14/S15 top feed dato 1600 http://ozdat.com.au/forum/viewtopic.php?t=33881 |
Page 1 of 1 |
| Author: | Ackley Improved [ Mon Aug 17, 2015 6:11 pm ] |
| Post subject: | S14/S15 top feed dato 1600 |
I have a question regarding clearance under the bonnet on a 1600. With the standard S14/S15 plenum and side feed injectors there is no issue. Now when you go to top feed, due to the design of the factory plenum a spacer is need to sit between the two plenum halves for clearance. This spacer is usually a part of the fuel rail/injector kit. This spacer does make the plenum sit higher. Question is... with a 1600 will this raised height cause issues under the bonnet? Will a strut brace still be fine? Here is a link to the kit with the spacer, have to scroll down a little to the S14/S15. http://www.artperformanceparts.com/fuel ... -kits.html Cheers |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|