| OZDAT http://ozdat.com.au/forum/ |
|
| Seatbelt mounting spot http://ozdat.com.au/forum/viewtopic.php?t=33690 |
Page 1 of 1 |
| Author: | fapdatto [ Sat May 02, 2015 6:49 pm ] | ||
| Post subject: | Seatbelt mounting spot | ||
I had the hood lining done a while back and didn't ask the question then. From what I can gather the front seatbelt upper mounting point goes where I have marked the arrow on the attached pic. Can anyone give me a measurement from the rear side of the pillar to the mounting hole please as shown on the pic? I will then feel for it (rather than stripping back the edge of the hood lining). Thanks
|
|||
| Author: | nick [ Sun May 03, 2015 11:51 pm ] |
| Post subject: | Re: Seatbelt mounting spot |
What car??? |
|
| Author: | fapdatto [ Mon May 04, 2015 2:47 am ] |
| Post subject: | Re: Seatbelt mounting spot |
Good question! Sorry it's a 1600 (1970). |
|
| Author: | nick [ Mon May 04, 2015 10:15 am ] |
| Post subject: | Re: Seatbelt mounting spot |
I measured 18cm sedan and 24cm wagon... When feeling for the mounting hole through the roof lining there should be a flat section and the hole is in the middle of that... |
|
| Author: | fapdatto [ Mon May 04, 2015 2:04 pm ] |
| Post subject: | Re: Seatbelt mounting spot |
Thanks very much Nick - appreciate it. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|