Awesome good to hear. look well made and are a reasonable price.
got some time on Saturday to do some rust repairs while the kids slept.
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3319.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3320.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3346_1.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3340.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3341.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3342_1.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3349.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3350.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3347_1.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3348.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3351.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3353_1.jpg.html)
![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3355_1.jpg.html)
| OZDAT http://ozdat.com.au/forum/ |
|
| 510 On A Budget http://ozdat.com.au/forum/viewtopic.php?t=33489 |
Page 6 of 9 |
| Author: | sutho510 [ Thu Nov 03, 2016 8:21 pm ] |
| Post subject: | Re: 510 On A Budget |
I used the same hsd kit for my r31 coilovers with a few datsport bits there great to use |
|
| Author: | Stowers [ Mon Nov 07, 2016 11:15 am ] |
| Post subject: | Re: 510 On A Budget |
Awesome good to hear. look well made and are a reasonable price. got some time on Saturday to do some rust repairs while the kids slept.
|
|
| Author: | SR20Datsun [ Mon Nov 07, 2016 11:22 am ] |
| Post subject: | Re: 510 On A Budget |
Wanna run fat rubber on the rear? Don't forget to roll the inners at this stage! (wish I had've) |
|
| Author: | Stowers [ Mon Nov 07, 2016 2:29 pm ] |
| Post subject: | Re: 510 On A Budget |
thanks man will do before undercoating |
|
| Author: | SR20Datsun [ Mon Nov 07, 2016 3:11 pm ] |
| Post subject: | Re: 510 On A Budget |
Great job so far. It's really coming along nicely. |
|
| Author: | Stowers [ Mon Nov 07, 2016 6:09 pm ] |
| Post subject: | Re: 510 On A Budget |
Cheers mate! Hoping to get most of the rust repairs done by January. Then the rest of the year to rust proof it and put it together which I heard is the fun part. Told the misses no holidays for 2017 its all about the datto which she wasn't happy about at first but she seems to be on board, so fingers cross. |
|
| Author: | WAGN71 [ Mon Nov 07, 2016 7:52 pm ] |
| Post subject: | Re: 510 On A Budget |
Just going to say all the build threads on ozdat this is turning into my favorite. A bloke having a good crack its awesome to follow mate. Well done so far and look forward to rest of build |
|
| Author: | Stowers [ Tue Nov 08, 2016 12:55 pm ] |
| Post subject: | Re: 510 On A Budget |
Thanks a lot man! i think when all the welding is done ill start getting more motivated. need to get a handbrake cable made if anyone knows a good place in Sydney. |
|
| Author: | Coz22a [ Tue Nov 08, 2016 4:36 pm ] |
| Post subject: | Re: 510 On A Budget |
Try Conwire. http://www.cablerepairs.com.au They have made a kick down cable for my 1600. Gave them the original to copy. Great build, keep it up. Mick |
|
| Author: | Stowers [ Tue Nov 08, 2016 8:35 pm ] |
| Post subject: | Re: 510 On A Budget |
Thanks man I'll give them a call tomorrow |
|
| Author: | datsonial [ Tue Nov 08, 2016 10:33 pm ] |
| Post subject: | Re: 510 On A Budget |
Hey stowers, nice progress! We seem to always be at similar stages of the build.. I really want to finish mine by the end of 2017 I challenge you to a friendly competitive/motivational race.. Winner gets a free ozdat stubbie holder Good luck! |
|
| Author: | Stowers [ Wed Nov 09, 2016 10:28 am ] |
| Post subject: | Re: 510 On A Budget |
cheers man! are we talking drivable or registered? its a deal anyway motivational race to end of 2017. |
|
| Author: | Stowers [ Mon Nov 21, 2016 1:12 pm ] |
| Post subject: | Re: 510 On A Budget |
Mini rust remover bath ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3420.jpg.html) This sh*t is good for hard to reach areas ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3422.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3421.jpg.html) paint and rust removal ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3445.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3447.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3448.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3451.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3452.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3461.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3454.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3463.jpg.html) all Welded in, now for a lot of grinding. then other side |
|
| Author: | Stowers [ Mon Dec 12, 2016 12:38 pm ] |
| Post subject: | Re: 510 On A Budget |
Passenger b pillar and quarter rust has been removed, painted and welded in Drill and tap for Datsport adapter brackets ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3572.jpg.html) dummy fitting calipers and hubs before going any further with brake pads and seal kit ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3578.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3577.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3576.jpg.html) Lead filling some dents because I'm no panel beater ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3601.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3603.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3604.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3605.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3608.jpg.html) ![[ img ]](http://s1038.photobucket.com/user/81pw/media/IMG_3610.jpg.html)
|
|
| Author: | SR20Datsun [ Mon Dec 12, 2016 1:32 pm ] | |
| Post subject: | Re: 510 On A Budget | |
Lead filling some dents because I'm no panel beater
 Very cool.
|
||
| Page 6 of 9 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|