Wondering what size jets are in a 32/36 weber for a l20?

Same one's that come with it ?. Originally came out on 2.0L cortina's, so close enough that it doesn't matter for an L20. Otherwise I'm sure you could hunt around and find the bench tuning recommendations from weber, given your engine characteristics, from there, you have to visit a dyno to get it exact.

_________________
Happiness is watching the race.... in your rearview mirror

I found out if u buy a weber for a l16,l18,l20 they all have the same jet sizes

I found out if u buy a weber for a l16,l18,l20 they all have the same jet sizes

exactly!!!!!!!!

140/140 is about it

Is this true? I have a weber 32/36 on my L16 and its running rough at idle but fine once im driving and ive come on here now to try and find needle/jet info. My engine is basically stock but has a Wade 72 degree in it with lash pads etc to suit the came. It seem to pull quite well with no flat spots but at idle its just puring in the fuel. Is this something I can fix at home?

_________________
71' 1600 purple with L20 (wasting away in the shed)
Nissan Stagea Dayz 1999

YES IM A CHICK

Lean it off on the idle screw on the base of the carb. If that dosnt work you might need to go one jet smaller on the idle circuit.

_________________
Chris Thomas

1971 1600, mild L18, 5 speed

All I want is less to do, more time to do it and higher pay for not getting it done.