OZDAT http://ozdat.com.au/forum/ |
|
EFI on A12 http://ozdat.com.au/forum/viewtopic.php?t=31922 |
Page 1 of 1 |
Author: | davem69 [ Wed Oct 30, 2013 5:53 pm ] |
Post subject: | EFI on A12 |
Hi Guys I just bought Factory EFI for my new engine I want to know what ecu to put with it The engine iam putting in on is a A12 bored out to 75mml alloy flat top piston 70grind cam and A14 Head |
Author: | Nissanman [ Wed Oct 30, 2013 8:40 pm ] |
Post subject: | Re: EFI on A12 |
If it is not force fed, a fuel only ECU would be fine, e.g. a Haltech F9 |
Author: | davem69 [ Fri Nov 01, 2013 8:14 pm ] |
Post subject: | Re: EFI on A12 |
Yeah ok how can tell if its force feed because that sounds like the cheaper way to go? |
Author: | Nissanman [ Fri Nov 01, 2013 8:19 pm ] |
Post subject: | Re: EFI on A12 |
By that I mean is it normally aspirated or is it turbo/supercharged? |
Author: | davem69 [ Sat Nov 02, 2013 10:38 pm ] |
Post subject: | Re: EFI on A12 |
Sorry just normal No turbo |
Author: | dattouteboy95 [ Sat Nov 09, 2013 10:31 pm ] |
Post subject: | Re: EFI on A12 |
Im using microtech fuel and spark just get sensors and a fuel pump and bigger fuel lines and make a return back to the tank and use a electric dizzy e15 single coil is fine but if you want find a e15 turbo dizzy and you can run 4 coil packs cause the turbo dizzy has a hall effect sensor in it which is bassicaly a crank angle sensor |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |