OZDAT http://ozdat.com.au/forum/ |
|
Flare/tube nut size for datsun 1600 http://ozdat.com.au/forum/viewtopic.php?t=31276 |
Page 1 of 1 |
Author: | Nad015 [ Mon May 27, 2013 7:52 pm ] |
Post subject: | Flare/tube nut size for datsun 1600 |
I need to order some flare nuts for my 3/16 brake lines Anyone know the details (thread pitch, etc). Setting up a 7/8 m/c and all fittings are the same type(m/c, 3 way splitter, flexi brake lines, etc..) Just need to know the size |
Author: | nick [ Mon May 27, 2013 8:04 pm ] |
Post subject: | Re: Flare/tube nut size for datsun 1600 |
Just buy some vernier calipers and measure for yourself. From memory there are a couple different sizes of threads pending if its a local master cyl or import etc... Most are something like 10x1mm... |
Author: | Nad015 [ Mon May 27, 2013 8:09 pm ] |
Post subject: | Re: Flare/tube nut size for datsun 1600 |
I'm away for work. Otherwise I'd just get them from the local brake shop. It's a jap spec 7/8 m/c from datsport. I did have the time to check that all the brake nuts I need are the same thread, thought some one might know off the top of their head. |
Author: | Baz [ Tue May 28, 2013 10:02 am ] |
Post subject: | Re: Flare/tube nut size for datsun 1600 |
10x1mm, long nuts are best. |
Author: | SR20Datsun [ Tue May 28, 2013 11:35 am ] |
Post subject: | Re: Flare/tube nut size for datsun 1600 |
Make sure you get a good quality spanner for brake lines too. If it slops around you round off the nut trying to undo them! |
Author: | Nad015 [ Tue May 28, 2013 12:11 pm ] |
Post subject: | Re: Flare/tube nut size for datsun 1600 |
Cheers baz Yeah I've got a good set of flare nut spanners. |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |