OZDAT http://ozdat.com.au/forum/ |
|
My 200b project http://ozdat.com.au/forum/viewtopic.php?t=28023 |
Page 1 of 3 |
Author: | sa200b [ Wed Feb 15, 2012 6:48 pm ] |
Post subject: | My 200b project |
Hello Ozdaters, I recently joined the forum and I have been stalking it for a couple of days and I thought I better start my own build thread. So here is a couple of pics of my 200b just after I purchased it. Still an Automatic at this point. Had just had a bath and a couple of coils expertly removed by me Attachment:
Attachment:
Unfortunately I forgot to take original interior pics /facepalm but I can assure you it was half the reason I purchased this. As with my spare 200b I had rusting away in my yard I could make very clean inside. Continued below with some update pics;
|
Author: | yellow jdm datto [ Wed Feb 15, 2012 7:33 pm ] |
Post subject: | Re: My 200b project |
looks sick with the supalites |
Author: | sa200b [ Wed Feb 15, 2012 7:35 pm ] |
Post subject: | Re: My 200b project |
So here's a couple of pics of my interior (needs a wash sorry) as it is today. There's also a little clue that I have done a manual conversion Attachment:
Attachment:
It's actually in really good condition for it's age. Only missing ONE (so annoying) little silver piece on the air vent control and thats it. I've organized to have the seats re-faced in the same material as original but actually black and re-stitched in the same pattern aswell. Buying some black molded loop pile carpet online then it's pretty much done inside! Might get the roof lining bleached but it's not too bad tbh.
|
Author: | sa200b [ Wed Feb 15, 2012 7:58 pm ] |
Post subject: | Re: My 200b project |
Only thing I have done to the engine is put electronic ignition, new coil and manual conversion. Other than that it's a bog standard l20b. More on that later. Attachment:
|
Author: | sa200b [ Wed Feb 15, 2012 8:06 pm ] |
Post subject: | Re: My 200b project |
Now to show off how it looks at this moment. All I've done is lowered it. Fitted 16x8 Performance Superlites, swapped the rusty bonnet over for a less rusty one and pumped the front guards to accomodate the 8s. It's a little rough and it needs some body work but it all takes time and jelly beans. Attachment:
Attachment:
Attachment:
Attachment:
|
Author: | sa200b [ Wed Feb 15, 2012 8:19 pm ] |
Post subject: | Re: My 200b project |
So that's it for now. My wishlist is currently; Exterior -Quick coat of paint and some dent removal till later on -Front apron spoiler -guard mirrors that look factory - wouldn't mind some help here, plz -window tint Interior -carpet -seat trim -someone to hide my stereo cause I don't want to cut anything. Maybe even switch to usb only player, who uses CDs anyway? Engine/drivechain -5-speed box. I hate the 4-speed but it was free. -Get my diff locked -Extractors/exhaust -http://www.weberperformance.com.au/prod ... ucts_id=10 <<<THIS!! -Mild cam -Head reworked (not mine, I like it screwed up, I mean the engines head) -Some general wiring tidy up Suspension/brakes -undecided. Datsport stuff looks good though Hope you enjoyed viewing my crap. If anyone can help out, let me know. I'll keep updating as I get stuff done |
Author: | sa200b [ Wed Feb 15, 2012 10:38 pm ] | |
Post subject: | Re: My 200b project | |
looks sick with the supalites
I was getting there! Spoil my fun..
|
Author: | yellow jdm datto [ Thu Feb 16, 2012 9:53 pm ] |
Post subject: | Re: My 200b project |
hahah sore it near datsport the other week |
Author: | SSSBEE [ Fri Feb 17, 2012 11:36 pm ] |
Post subject: | Re: My 200b project |
Nice pics man, Down south aswell? |
Author: | sa200b [ Fri Feb 17, 2012 11:41 pm ] | |
Post subject: | Re: My 200b project | |
Nice pics man, Down south aswell?
Yep. In lonsdale. Took the pics with my phone quickly for this thread
|
Author: | sa200b [ Wed Feb 22, 2012 6:08 am ] |
Post subject: | Re: My 200b project |
Feels like driving a diesel 60 series since doing the manual conversion. Picking up a 3.54 r180 diff for it on Friday. Should I lock it before I put it in? |
Author: | yellow jdm datto [ Wed Feb 22, 2012 6:36 pm ] |
Post subject: | Re: My 200b project |
yep |
Author: | SSSBEE [ Tue Feb 28, 2012 8:47 pm ] | |
Post subject: | Re: My 200b project | |
Feels like driving a diesel 60 series since doing the manual conversion. Picking up a 3.54 r180 diff for it on Friday. Should I lock it before I put it in?
Depends but i would
|
Author: | sa200b [ Wed Feb 29, 2012 2:23 pm ] |
Post subject: | Re: My 200b project |
Yep. Turns out I didn't need to |
Author: | svd001 [ Thu Mar 01, 2012 11:01 pm ] |
Post subject: | Re: My 200b project |
What offset are those rims????? |
Page 1 of 3 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |