OZDAT http://ozdat.com.au/forum/ |
|
Brake Upgrades Performance and Weight http://ozdat.com.au/forum/viewtopic.php?t=34403 |
Page 2 of 2 |
Author: | sutho510 [ Wed Jul 11, 2018 7:30 pm ] |
Post subject: | Re: Brake Upgrades Performance and Weight |
That picture of that wheel and disc is insane |
Author: | d [ Thu Jul 12, 2018 11:41 pm ] |
Post subject: | Re: Brake Upgrades Performance and Weight |
Some datsun 1200 guys used Mazda s5 alloy hubs, the 4 spots calipers as well on some American Nascar alloy hat discs. Much cheaper from racejunk.com. If you can machine or sleeve your stub axles to take the Mazda hubs and bearings its a big savings but dont forget to angle grind the mazda logo off the calipers |
Author: | AlanDatsomefun [ Tue Jul 24, 2018 2:29 pm ] |
Post subject: | Re: Brake Upgrades Performance and Weight |
I managed to find a photo of Greg Carr's strut, with somewhat higher resolution. What it shows is remarkable. The high tensile bolts used to fix the steering arm to the strut were fitted with Nyloc nuts. Here's my assessment of what happened .. brakes get really hot, so does the strut (shock absorbers can get hot, too) ... heat gets transferred to the steering arm ... hot enough for the nylon to soften ... nut comes loose under extreme vibration and falls off ... bolt slides out as far as it could go and fouls the bolts that attach the rotor to the hub ... the wheel can no longer rotate ... as the say, the rest is history. This problem could have been avoided by using a Crimp Lock Nut, ConeLock type nut or locking tab to hold the nut in place regardless of temperature. But for want of the "right" 50 cent component the race was lost. "Things work best when it matters least, and ... |
Author: | SR20Datsun [ Tue Jul 24, 2018 2:50 pm ] |
Post subject: | Re: Brake Upgrades Performance and Weight |
Interesting. Nylon's glass transition temperature (Tg) is only 47degC. Melt point is around 200degC. I would assume the Tg temperature would be fairly easy to reach considering the proximity to the heat source. This might be enough to soften it up compounded with vibration and as you say... the rest is history. Definitely a good refresher. Thanks Alan. |
Page 2 of 2 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |