G'day all,
I am currently attempting an L20b conversion into my 120y, and have some questions for anyone who has completed the swap before or may be able to help me.
As far as the conversion is concerned, a 180b crossmember should be the go with a 180b steering setup. I've gone to fit up the 180b crossmember I have, and it doesn't quite fit. The spacing between the bolt holes is too wide (by about 5-10mm) and the width of the whole unit from drivers side to passenger side seems to be about 5mm too long. From all the build threads i've read, noone mentions having to slot the holes to get the crossmember to fit. I have no problem doing this, but i wanted to confirm that this was the necessary way to do it?
Any help regarding the conversion is greatly appreciated.
|