Offline |
|
Joined: Mon Jun 15, 2009 12:15 pm Posts: 942
Location: Cairns
|
If there is no home signal there can only be a few thing wrong, provided you have properly tested it.
1: bad wiring connection or mis wired.
2: fulty cas or disc not compatible with ecu.
3: incorrect parameters set in ecu eg: set on cam driven instead of crank driven cas.
4: timing is out.
If you haven't already used a timing light I would suggest you do. It wlli give you a better indication of what's actually going on.
Also how did you determine tdc on your cas?
|
|