Ozdat Home Feature Cars Ozdat Classifieds Event Calander Links Trade Link Tech Resource Merchandise Donate Web Mail
It is currently Thu Mar 28, 2024 8:31 pm

All times are UTC+11:00




Post new topic  Reply to topic  [ 14 posts ] 
Author Message
PostPosted: Tue Dec 03, 2013 6:59 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Hi Newbie from ATL GA USA here
took over this project and here is what is on tap so far on it!



[ img ]

[ img ]

[ img ]

[ img ]

ITB's are not what i will use as i am going to do dual side draft solex carbs, but it will look very close to it, and a custom made header i will be fabricating for it after i do the engine swap in it this should be up and running by summertime, hopefully.

[ img ]

[ img ]

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Tue Dec 03, 2013 7:01 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Here is the look i am looking for, but without the body kit and 15 or 17 inch wheels that fit perfectly no hella-flush crap in my cars!!
[ img ]

[ img ]

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Tue Dec 03, 2013 7:02 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Cleaned and put together the front end!

[ img ]

[ img ]

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Tue Dec 03, 2013 7:03 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
here is what i was trying to get, so fackien difficult to get a set of these here in the states!
[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Tue Dec 03, 2013 7:04 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Ok here is somethin i do last nighet when imsomnia attacks,
Went downstaresand start mocking up the engine tranny combo,
If you are familiar with Nissan u must know SR20 block castings are different from FWD to RWD
But u can use the FWD one in RWD with some modifications but you cant do the other way around!

Here is what u need to trim from the FWD block to make it fit on the RWD tranny,,,

[ img ]


You need to trim all that to get the RWD starter on its place,
Then in order to atach the tranny on that side a heavy duty bracket need to be fabricated, and that bracket is bolted to the side of the block and goes back to the tranny bellhousing under the starter, this bracket must be minimum 3/8 thick steel or 1/2 inch aluminum,
It will be cool and super strong, this way any SR20 block could be used and i dont have to be obligated to use the ABUSED RWD blocks only!

Pss
By the way those mods is only on the starter side cuz the other side it a prfect fit!

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Tue Dec 03, 2013 7:04 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Just in case you guys ask or worried about the amount of material to be removed from the block,,,

Is not that much for real, the RWD casting do not have the starter ring whatsoever and the only difference is the lower ear for bellhousing attachment is in a lower position, thats it, i am just replacing the lower ear with a fabricated bracket that bolts to the engine block next to the motor mount bracket and maybe 3 or 4 oil pan bolts all together,

I do drill one hole on the tranny bell to acomodate the top right hand bolt and use a spacer betwine the tranny bell and the engine cuz the bell is hollow there,

But here is a rugh sketch of what that bracket will look like!

By the way the top bracket is not necesary but i just trow it out there just in case someone ask!

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Tue Dec 03, 2013 7:05 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Free 14x6 Appliance wire mag wheels
Cleaned and paint em dark bronze, this will do for now!

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Mon Dec 09, 2013 5:46 pm 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
here is some nice wheels someone send pictures to me,



Atara Racing, they are watanabes knock offs but they got something i like that i dont like in the watanabes and i cant figure it out yet!

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Mon Dec 09, 2013 5:49 pm 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
here are they mounted on a Datsun B310 Station Wagon!

[ img ]
[ img ]
[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Wed Dec 11, 2013 4:53 pm 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Score a NEW OEM EDM Grill!

[ img ] :cheers :cheers :cheers

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Wed Dec 11, 2013 7:15 pm 
Offline
User avatar

Joined: Sun Aug 08, 2010 7:04 pm
Posts: 54
Location: South Africa
Hi we had a similar car here in SA and was called the DATSUN 160Y GX coupe and it had a L16 engine with 2 Hitachi carbs.Some folks still race them.


Top
   
PostPosted: Thu Dec 12, 2013 1:19 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
Nice, i wish i can see pictures!

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Tue Dec 24, 2013 9:52 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
New grill just arrive today from Denmark AWESOME, chrome trim deleted, 5 Philips head bolts and is in, wont do grill 1/4 light till i am 100% sure i cant get the JDM bumpers!

[ img ]

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
PostPosted: Sat Dec 28, 2013 9:12 am 
Offline

Joined: Tue Dec 03, 2013 6:52 am
Posts: 13
here is the block already cut and with the tranny and starter installed,

next will be the bracket fabrication, to make this work the way it should!

[ img ]

[ img ]

[ img ]

[ img ]

_________________
SR20 Carbed Datsun B310
[ img ]


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 14 posts ] 

All times are UTC+11:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: 

Powered by phpBB® Forum Software © phpBB Limited