My solid center 4 puck was easy in traffic on the l16 with light fly wheel

sweet if there easy to live with i might look into one

Yep I used to drive mine every day for about 2 years and clutch was never an issue

_________________
120Y 4DOOR SEDAN SR20DE WITH ITB'S

http://datsun1200.com/modules/newbb/vie ... post494892

Go to KB Clutches at Penrith, behind Penrith Brake & Clutch, for $300 he made up a clutch plate & preesure plate that will take 400 hp & have a standard pedal pressure. A friend has this set up in his blown openwheeler & not a problem with slip or heavy pedal. He then got one for his Falcon wagon with the Tickford upgrades & it's clutch pedal is lighter than my Sunny wagon. I've got one for my L20B Sunny, & I reckon it's lighter than the set up in the other car with the L18. His number is 4732-1692. He's at 143 Coreen Ave Penrith, in the very back unit.

sweet that sounds great!!! i used to work around the corner from them i will give them a call.

progress has pretty well stopped on the 1200 as i snaped my bicep tendon when i was away at work BUT have stated buying some pats for this project and new projects.
have decided to go full sequential fuel + spark with an ms3x or ms3pro, ls1 coils with an after market mount and modified sr20 cas with diyautotune cas wheel that will support full sequential without a separate rpm input.



also got myself a a14 egi manifold that will be put into a 1200 ute with a t25 turbo feeding it. will be using the ecu and dizzy from my 1200.

Score. Too much whacking the didleyoooi at work hey
So a ute now too.

hahaha not enough whacking the didleyooi at work.
yep had a ute for about 2years now, never have enough datos

Nice one where did you get your coil bracket from? I ended up making mine but that looks neater

_________________
120Y 4DOOR SEDAN SR20DE WITH ITB'S

http://datsun1200.com/modules/newbb/vie ... post494892

Got it from fella on eBay in the states. just put ls1 coil bracket.

put the order in for an ms3pro last night so thought i had better get my cas sorted out. also fixed my charging issue since putting on the race crank pulley by turing the alt pulley down on the lath.

That alt is close to the hose.

nah looks close but theres plenty of room.

whats up with the Tendon getting op for it? I also twitched my supraspinatus tendon revealed on ultrasound, that connects to the bicep but MRI will clear up what the damage is and maybe ATI therapy if its suitable.

yep had an operation 2 weeks ago, mine was the distal tendon that ruptured, they have to drill the forearm and put a stitch trough the hole with a button to lock it in. recovery is way more painful than the injury but better than loosing 50% strength rotation and 30% lifting. hope yours is an easy fix. I'm surprised ho small the hole is