OZDAT http://ozdat.com.au/forum/ |
|
510 On A Budget http://ozdat.com.au/forum/viewtopic.php?t=33489 |
Page 1 of 9 |
Author: | Stowers [ Thu Jan 29, 2015 2:03 pm ] | |||||||
Post subject: | Re: 510 On A Budget | |||||||
Remember to drain the oil before dropping the engine
|
Author: | SR20Datsun [ Thu Jan 29, 2015 2:13 pm ] |
Post subject: | Re: 510 On A Budget |
Welcome to Ozdat! Keep chipping away at it and let us know how you go. |
Author: | sutho510 [ Thu Jan 29, 2015 6:40 pm ] |
Post subject: | Re: 510 On A Budget |
Good work mate what are the plans for it are you going to keep it a L series? |
Author: | Stowers [ Thu Jan 29, 2015 8:04 pm ] |
Post subject: | Re: 510 On A Budget |
Thanks sr20datsun going to be fun slowly working on her in my spare time Nar mate going with the boring sr20det. Been driving old sigmas and corollas since I was 16 and as much as I love the sound of set of carbs at full throttle I'm well over due for a turbo car. |
Author: | Azzdat16 [ Thu Jan 29, 2015 8:20 pm ] |
Post subject: | Re: 510 On A Budget |
Welcome mate! Best thing to do is enjoy the process of biulding it up. Even if it takes longer than you first envisaged (it usually does). |
Author: | Anth510 [ Thu Jan 29, 2015 9:03 pm ] |
Post subject: | Re: 510 On A Budget |
Always great to see a new project pop up! |
Author: | Stowers [ Fri Jan 30, 2015 9:26 am ] |
Post subject: | Re: 510 On A Budget |
Cheers fellows! hard thing is try to figure what I'm going to start doing first. Definitely need a air compressor. cracking axle nuts car nearly came off the stands. |
Author: | Nad015 [ Fri Jan 30, 2015 10:03 am ] |
Post subject: | Re: 510 On A Budget |
Looks like a good solid shell which is the most important thing with these cars. I'm in the same boat as you 3 kids, mrs, house that we are pouring money into with renos, the datto get a spare dollar or 2 thrown at it when I can. Keep plugging away |
Author: | Stowers [ Tue Feb 03, 2015 7:24 pm ] |
Post subject: | Re: 510 On A Budget |
Cheers mate. Rather spend couple extra dollars on a good shell then skimp and get a rust shell to spend the $$$ on repairs Some Amateur panel beating today I'll have to buy welder and compressor in the next couple weeks. |
Author: | Stowers [ Tue Feb 03, 2015 7:32 pm ] |
Post subject: | Re: 510 On A Budget |
Stoked no rust in floor pan or chassis rails. and some more dent repairs. |
Author: | Stowers [ Mon Feb 09, 2015 6:55 pm ] | |||||||
Post subject: | Re: 510 On A Budget | |||||||
Some more boring panel working
|
Author: | Stowers [ Mon Feb 09, 2015 7:05 pm ] |
Post subject: | Re: 510 On A Budget |
Cheap Tools |
Author: | Stowers [ Mon Feb 09, 2015 7:15 pm ] |
Post subject: | Re: 510 On A Budget |
Some more time with dolly and hammer should come up mint. Need to buy a body file |
Author: | unfamilia [ Mon Feb 09, 2015 10:07 pm ] |
Post subject: | Re: 510 On A Budget |
Coming nice and slow but well worth it. |
Page 1 of 9 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |