OZDAT
http://ozdat.com.au/forum/

Blower Motor Wiring
http://ozdat.com.au/forum/viewtopic.php?f=32&t=34831
Page 1 of 1

Author:  Woznaldo [ Fri Jan 04, 2019 6:13 pm ]
Post subject:  Blower Motor Wiring

Happy New Year All!

My blower motor hasn't worked for a little while so I decided to have a look to see whats up. I have a look at generic wire diagrams and they all have 12v supplied to the 3 speed switch, then through 0, 1 or 2 resistors, then through the motor to earth.

When I did a volts check on mine ('72 Aus model), it appears to be the reverse of that? That is, 12v to the motor, then through 0, 1 or 2 resistors and switched to earth through the 3 speed switch. The question? Is this an Aus model thing?

If not, I'll do a full continuity check of the system.

Woz

Page 1 of 1 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/