Ozdat Home Feature Cars Ozdat Classifieds Event Calander Links Trade Link Tech Resource Merchandise Donate Web Mail
It is currently Fri Mar 29, 2024 8:13 pm

All times are UTC+11:00




Post new topic  Reply to topic  [ 19 posts ]  Go to page « 1 2
Author Message
 Post subject:
PostPosted: Tue May 02, 2006 8:22 am 
Offline
User avatar

Joined: Wed Dec 17, 2003 4:46 pm
Posts: 777
Location: Bendigo
thanks dave, managed to pick up one already though from Baz.
cheers,
dave

_________________
Dave W

The 1600

Recommended traders: Nissanman, pro240c, 2door510, Datsport, mkyle, Green510, Um_510, jdmdatsun510, Ludachris


Top
   
 Post subject:
PostPosted: Tue May 02, 2006 10:21 am 
Offline
Donating Member
Donating Member
User avatar

Joined: Sun Mar 23, 2003 1:45 pm
Posts: 3200
Location: Newcastle, NSW
Glad you got it sorted.

I've gotta have a cleanup :roll:

I've got stuff spread over my shed, and stuff that's been under the parent's house for years, and I can never find anything :oops:

_________________
1970 ex Group A Rally P510
1971 P510
1972 180B SSS
1965 SP310 Fairlady
1966 SP311 Fairlady


Top
   
 Post subject:
PostPosted: Wed May 03, 2006 8:54 pm 
Offline
User avatar

Joined: Wed May 14, 2003 8:01 pm
Posts: 189
Location: Crib Point, Vic.
My 240k has a similar problem not that I've changed the clutch: The clutch doesn't disengage even with my foot on the floor. The thing that makes me hesitant to drop the transmission is that the pedal isn't loose at the top of the motion.

If the problem was that the wrong thrust bearing carrier was installed, wouldn't the pedal feel slack at the top? ATMO, it's solid all the way down, but doensn't disengage.

Oh, and there's nothing wrong with either of the cylinders. I've checked them, they're fine.

Pleasse help! I put in a smaller diameter slave, but it still only *just* works!


Top
   
 Post subject: Re:
PostPosted: Mon Feb 10, 2020 12:33 pm 
Offline
Donating Member
Donating Member
User avatar

Joined: Sun Mar 09, 2003 8:11 pm
Posts: 2121
Location: South Adelaide
Dave wrote: *
Well, you did say no rush :lol:

Only ever found the one carrier (Z18) in my shed when I was cleaning up months ago, but was under the parent's house today looking for lower control arms to extend the ones on my 1600, and found two bearing carriers there :roll: .

If you still need a carrier, let me know and I'll send one down to you.
Been mucking around with these today. Broke one trying to press a bearing on! :( The one i broke was 28mm thick (measured from where the fork pushes against the two sleeve tabs to the where the bearing seats. It looks approx 4mm longer than the left one Dave pictured. I also have a 24mm thick one (280zx L28? / Dr30 Fj20et) and some short ones as pictured on the right which i think are out of 1600 L16 4speeds...


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 19 posts ]  Go to page « 1 2

All times are UTC+11:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: 

Powered by phpBB® Forum Software © phpBB Limited