OZDAT
http://ozdat.com.au/forum/

Ke30 b310
http://ozdat.com.au/forum/viewtopic.php?t=34661
Page 1 of 1

Author:  lukeanderson88 [ Fri Oct 06, 2017 11:47 am ]
Post subject:  Ke30 b310

G'day all. Sorry if this questions been asked before.
Ive come to possess a ke30 diff, ive heard these are viable swaps into dattos.
Drum to drum the ke30 is 1355mm and b310 is 1360mm i think (correct me if wrong), but what about leaf spring mounts and width. Has anyone done this swap. Any info would be appreciated.
Cheers,Luke.

Author:  DatsAndy [ Sat Oct 07, 2017 10:11 am ]
Post subject:  Re: Ke30 b310

It will bolt in but theres two types of diffs a borg warner aussie diff and a jap diff H150 depending on models so your problem may be that your tail shaft wont bolt up. May need to get the matching tail shaft from sunny. They have an obvious difference the borg warner usually has a inspection/service plate on the back about 8 or 10 bolts ( dont quote me) and the borgy centre is on studs and H150 bolts in (again dont quote me)

Page 1 of 1 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/