OZDAT http://ozdat.com.au/forum/ |
|
R180 diff removal http://ozdat.com.au/forum/viewtopic.php?t=34635 |
Page 1 of 1 |
Author: | chefly [ Wed Aug 23, 2017 5:21 pm ] |
Post subject: | R180 diff removal |
How the **** do I get the diff out past the moustache bar .... all bolts are out halve shafts are off and now I'm stuck???? |
Author: | Simon89 [ Wed Aug 23, 2017 8:40 pm ] |
Post subject: | Re: R180 diff removal |
Unbolt the moustache bar! |
Author: | chefly [ Wed Aug 23, 2017 8:53 pm ] |
Post subject: | Re: R180 diff removal |
Thanks genius |
Author: | Stowers [ Thu Aug 24, 2017 9:23 am ] |
Post subject: | Re: R180 diff removal |
lower the cross member or unbolt the diff cover and drop the cover with the moustache bar. |
Author: | Coz22a [ Fri Aug 25, 2017 12:46 am ] |
Post subject: | Re: R180 diff removal |
Can you pull the moustache bar studs out of the diff cover? |
Author: | chefly [ Mon Aug 28, 2017 9:14 pm ] |
Post subject: | Re: R180 diff removal |
Cheers guys got it out |
Author: | SR20Datsun [ Tue Aug 29, 2017 7:42 pm ] |
Post subject: | Re: R180 diff removal |
Common party trick to remove the studs on the back of the diff cover and replace them with suitable sized bolts. Then there is no stud sticking out making it hard when you have to rip the diff moustache bar off. I have ripped my R200 in and out at least a dozen times this year! Got it down to a fine art. Hope to NEVER do it ever again. |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |