Guys I'm upgrading to a R200 LSD (Got the diff for free) so I'm selling my adaptors. If any one is interested send me a PM. $500 plus shipping. In perfect working order

_________________
1928 Model A CC Pickup

I haven't been on here in a while, but just saw this. It ended up great, I had one side pop out of its clip once, but just tapped it back in. Also found the oil all came out the breather when cornering as the high capacity diff cover wasn't baffled. To fix that I popped the top off the breather and put a hose on it to raise the breather.

The KAAZ LSD was the best LSD I've used, very chattery to start with but after a few oil changes it settled down. I used the kaaz oil to start with and after that some castrol oil, nothing special.

Bump!

_________________
1928 Model A CC Pickup

Are these needed for Datsun r160 to Subaru r160 swaps?

Nope. They allow you to used the standard 1600 half shafts with a Subaru R180 clutch plate LSD diff

_________________
1928 Model A CC Pickup

So if I want a r160 suby LSD and have 1600 shafts what do I need to do?

You need this

from this thread

http://www.ozdat.com/forum/viewtopic.php?f=55&t=30535

plus a pair of standard 1600 output flanges to replace the Subi splined stub axles, plus a 1600 / 180B input flange so the tailshaft bolts on.

Bolts up with no modified components and gives you a good clutch-plate style LSD. Don't like the 3.7 ratio ? You can bolt the LSD centre into most Subi R160 LSD's to get a range of ratios (I have this centre in an STi 4.44 diff, only needed to enlarge the crownwheel mounting boltholes from 10 to 12mm).

_________________
1970 ex Group A Rally P510
1971 P510
1972 180B SSS
1965 SP310 Fairlady
1966 SP311 Fairlady

I know I need it button need the $700 in exchange and I don't have that lol.

Yep, you may get an R160 LSD cheaper (but will probably be a viscous unit), but by the time you muck around with modified / custom driveshafts or custom flanges it won't be that cheap and won't be anywhere near as easy. The RX turbo is the only bolt-in R160 I know of.

I don't know of anyone that makes R160 driveshaft adapters commercially, the only ones I've seen were backyard jobs.

_________________
1970 ex Group A Rally P510
1971 P510
1972 180B SSS
1965 SP310 Fairlady
1966 SP311 Fairlady

Hey guys, I just done this conversion on my 1600 and this write up was spot on, everything bolted in like was said. I used some modified shafts I bought off lampy instead of the beta shafts. I've only driven the car in the rain so far and the difference is amazing, very fun! I have a suretrac center in my diff.

_________________
Chris Thomas

1971 1600, mild L18, 5 speed

All I want is less to do, more time to do it and higher pay for not getting it done.

Good to hear the shafts are working fine. They are quite simple to make, just a bit challenging finding s13 NA stubs.

How is the suretrac? different to a clutchpack?

_________________
Circuit Race 1600 in the build

What do you have to do to the shafts lampy?

_________________
Ongoing Project: 1972 Datsun 510 S13 SR20Det. http://ozdat.com/forum/viewtopic.php?f=33&t=17898
New Daily: D22 Navara (The new workhorse)
Retired 12/2016: MY98 Subaru Impreza RX
Previous Car: Restored Green 1972 Datsun 510, Hot L18

The suretrac works on a cam under load and is only 1 way. It's the only lsd I have driven so can't comment how it works compared to the plated center. It is so much more predictable in the wet then the open center. The diff was well priced, you can pick them up on eBay for $450.
Rjb, you need to machine back the cv flange and weld on a plate with a spigot to mount the datto Uni joint on. There is a topic on here that does the same thing with a subi r160 LSD. The procedure is the same.

_________________
Chris Thomas

1971 1600, mild L18, 5 speed

All I want is less to do, more time to do it and higher pay for not getting it done.

So I have a pair of the stub shafts, been sitting around for way too long, and have a pair of 1600 Driveshafts, but no bolts. I'm converting a 180B, so can re-use the outboard bolts, but no inboard studs. Anyone got a lead on where to purchase these from ? Haven't tried anyone yet.

_________________
Happiness is watching the race.... in your rearview mirror

Nissan Aust still sell them

_________________
Current car's 1970 240z #00330
1968 1600
1971 240z #00819
Previous Cars
Nissan works Bluebird SSS Z18T
240z NISMO RB20DET
260 z rally car
2+2 260
4 P510 rally cars